Instruction Manual


31
Mixed RAID Statuses
When a New disk that’s been formatted with a certain RAID mode in another
RAID System and is placed into the current RAID System along with an existing
disk, a “Mixed RAID” status will result. Under this circumstance, the New disk
can be re-formatted as JBOD (None RAID) mode. To do so, please complete
the following steps:
1. The New disk will appear as “RAID 0 (Broken)”, or other variations
depending on the situation for other RAID modes. The existing disk will
appear as “JBOD” for individual disk, or other variations depending on the
situation for other RAID modes.
2. To erase the previous formatting in the New disk, click the “Delete RAID
Info” icon under “Disk Information”.
“Delete RAID Info” will erase all data stored on the New disk. If you have
important saved data in the New disk, backup all data before selecting “delete
RAID Info”.