User's Manual

PAGE 1
a) Carefully remove the rubber Duran bumper surrounding the enclosure. Slowly stretch the bumper over each comer of the i Pro Duran RAID until loose. Is) Remove the screws from the bottom of the enclosure and slide the bracket out of the shell. «) Flip the bracket over and remove the screws that attach the drive(s) you wish to remove. y to enter | ' d) Slide the driveways) away from the connector and slide the new drive(s) in. Use the craws removed In the last step to secure the drive(s) to the bracket.
PAGE 2
[Application 22.5" Satanist or $5Ds {unto 15mm height) counterfactual * USB 3.1 C Type (Up to 10Gbps) Compatible with Thunderbolt 3 * RAID 0 Striping RAID Modes * RAID 1 Mirroring * BOD Clear (Independent drives} © BIG {born-RAID single volume) | » Windows 7 or higher System Requirements | 4 Ma Cos 10.6 or higher ® Linux or tare « Temperature: 5°C ~ 40°C Operating Environment |, 1. tidy: 10%RH ~ 803RD * Temperature: 20°C 70°C [Storage Environment |, yey: s36RH ~~ 909%RH .