Operation Manual

10
SPDIF
Digital audio output. Connect this output to a digital
audio input of an amplifier. A shielded coaxial cable
must be used to ensure an interference-free function.
Depending on the programs supplied by the stations
and the receiver settings, this port can provide e.g.
Dolby 5.1, AC-3 or dts signals.
Y/C
SVIDEO or SVHS output. If your flat-panel display
provides the corresponding input port, this signal may
be used instead of the CVBS signal for enhanced
picture quality.
Y/G
U/B
V/R
These ports provide either a RGB signal or a YUV
composite signal. Depending on the input ports
available at your TV set, these signals provide the best
possible picture quality. The selection of RGB/YUV is
made in the set-up menu of the receiver.
SAT OUT
The signal supplied to the SAT IN port is looped
through to this port when the receiver is switched on.
Not all models feature this port.
DVB-T
OUT
The signal supplied to the DVB-T IN port is looped
through to this port when the receiver is switched on.
Not all models feature this port.
HD
A USB 2.0 cable can be connected to models with the
"HD" option to provide a link to your personal
computer.
This connection can be used to transfer recorded
programs to your computer.
RS232
The RS232 data port can be used to connect a
computer and to load current channel lists or software.