Operation Manual

Proper use and operation

This product has been designed for use in a fixed installation on

mobile homes or camper trailers with maximum speeds of 130

km/h. It is designed to automatically aim a parabolic antenna

mounted on a stationary vehicle at geostationary television

satellites transmitting directly to Europe. The power to the system

is supplied by a standard vehicle electric system with a rated

voltage of 12 or 24 Volt. For installations where a connection to the

vehicle's electrical system is provided, a suitable 230-Volt to 12-Volt

power converter must be used.

Use of the equipment for any other purpose than the one specified

is not permitted.

Please also note the following instructions from the manufacturer:

• It is not permitted to change the overall device by removing or

adding individual components.

• It is not permitted to use other parabolic antennas or LNBs than

those installed originally at the equipment.

• Installation must only be performed by sufficiently qualified

personnel. All instructions in the supplied Installation Instructions,

which form part of the Operating Instructions, must be carefully

followed.

• All of the relevant and approved guidelines of the automotive

industry must be observed and complied with.

• The equipment must only be installed on hard vehicle roofs which

are sufficiently strong and inherently stable.

• No regular maintenance is required for the product. All housings

and enclosures must not be opened. Always ask a qualified

professional to carry out any maintenance work.

• In the event of any problems, or if you are unsure about anything,

please contact the manufacturer directly or a specialist workshop

which is approved by the manufacturer.