Operation Manual

38
Cut Deletes a channel from the channel list. The
subsequent entries are moved up to fill the free
position.
Note: To help keep the channels grouped in blocks,
all of the channels move up together only as far as
the next entry marked as "unused". If e. g. the list is
not occupied between entry 85 and entry 99, you may
delete entry 57, and only channels 57 to 84 will move
up. The channels from 100 are not affected.
Insert blank Inserts a blank entry. The subsequent channels are
moved downward accordingly.
Note: As with the option "Cut", this function
determines areas with channels marked as "unused"
as the end of a block.
Pack This option is only available if you have highlighted a
block. Within this block, all free positions marked
"unused" are deleted by moving the channels upward.
The unused entries are then positioned in sequence at
the end of the block.
Functions utilizing a target entry will prompt you to select a target entry
after the selection of the corresponding menu option. To do this,
navigate to the entry in the list and confirm with OK.
You can cancel the preceding steps by pressing EXIT as long as you have
not completed a function.
As an alternative to the direct editing of the channel list, a cache memory
is available for the convenient execution of complex sorting procedures.
Further operating information concerning the individual functions will
be displayed on screen.