Cut Sheet

ManualsBrandsOZ Gedney ManualsEnlargers1/2 IN COND NIPPLE INSUL

Applications

• Couplesconduitwhenneithercanbeturned.

Features

• Threaded(NPS)forrigidconduitandIMC

• Concretetight

Standard Materials

• Malleableiron

Standard Finishes

• Zincelectroplated

Options

• Foradditionalcorrosionprotection,specifyMechanically

Galvanized.Contactyourlocalrepresentativeforpricingand

availability.

NEC/CEC Certifications and Compliances

• ULStandard:514B

• ULListed:E-14814

• CSAStandard:C22.2No.18

• CSACertied:009795

• Fed.Spec./CID:A-A-50553

• ANSI/NEMA:FB-1

Type 4 3-Piece Couplings

Threaded For Rigid Conduit and IMC.

Type 4

Dimensions in Millimeters (Inches)

Trade Size

(Inches) Overall Length Max. Dia. Catalog Number

1/2 35.05(1.38) 36.58(1.44) 4-50

3/4 41.4(1.63) 44.45(1.75) 4-75

1 45.97(1.81) 49.28(1.94) 4-100

1-1/4 55.63(2.19) 60.45(2.38) 4-125

1-1/2 58.67(2.31) 66.8(2.63) 4-150

2 61.98(2.44) 85.85(3.38) 4-200

2-1/2 81.03(3.19) 101.6(4) 4-250

3 84.07(3.31) 106.43(4.19) 4-300

3-1/2 88.9(3.5) 130.3(5.13) 4-350

4 95.25(3.75) 139.7(5.5) 4-400

5 93.73(3.69) 174.75(6.88) 4-500

6 109.47(4.31) 209.55(8.25) 4-600

Fittings

NEC/CEC Rigid aNd iMC CoNduit FittiNgs

Visit our website at www.ozgedney.com or contact us at (800) 621-1506.

119

Summary of content (4 pages)

PAGE 1
Type 4 3-Piece Couplings Threaded For Rigid Conduit and IMC. Applications • Couples conduit when neither can be turned. Features • Threaded (NPS) for rigid conduit and IMC • Concretetight Standard Materials • Malleable iron Standard Finishes • Zinc electroplated Type 4 Options • For additional corrosion protection, specify Mechanically Galvanized. Contact your local representative for pricing and availability.
PAGE 2
Type ON Offset Nipple Threaded For Rigid Conduit and IMC. Applications • Provides box-to-box connection of knockouts. Allows misaligned knockout connection by “rolling” the offset nipple until aligned with each knockout. Features • Hub-to-hub offset is 3/4”. • See “A” in table for distance between boxes. Standard Materials • Malleable iron Standard Finishes Type ON • Zinc electroplated Options • For additional corrosion protection, specify Mechanically Galvanized.
PAGE 3
Type 300R Hex Reducing Bushings and Type 7 Bushed Conduit Nipples Threaded For Rigid Conduit and IMC. Applications Applications • To reduce a threaded conduit entry into a smaller trade size. Standard Materials Features • Malleable iron • Available with Insulated Throat. • With rigid conduit threads (NPS).
PAGE 4
Type 300R Hex Reducing Bushings and Type 7 Bushed Conduit Nipples Threaded For Rigid Conduit and IMC. Dimensions in Millimeters (Inches) Dimensions in Millimeters (Inches) Max. Dia. Across Corners Thread Length Flange Thickness Catalog Number Insulated Throat Catalog Number 3/8 22.35 (0.88) 12.7 (0.5) 3.3 (0.13) 7-38 — 322-R 1/2 28.7 (1.13) 12.7 (0.5) 4.83 (0.19) 7-50 7-50T  4.06 (0.16) 323-R 3/4 31.75 (1.25) 16 (0.63) 4.83 (0.19) 7-75 7-75T 19.05 (0.75) 4.83 (0.