Cut Sheet

AB4 AB4
Effective December, 2007
Copyright 2007
800-621-1506
www.o-zgedney.com
Spec 5
™
Malleable Iron Conduit Bodies
Type BC-G
Flat Top Design Cover
Use:
To cover conduit body opening.
Material/Finish:
Gray Iron/Hot Dip Galvanized stainless steel
screws.
Third Party Certification:
UL Listed:
E-18095
Suitable for wet locations when used
with gaskets, Type SG on malleable
iron conduit bodies.
CSA Certified:
LR-9795
Suitable for wet locations when used
with gaskets, Type SG on malleable
iron conduit bodies.
Applicable Third Party Standards:
UL Standard: 514A
CSA Standard: C22.2 No. 18
Fed Spec: A-A-50563
NEMA: FB-1, FB-2.10
Trade Size Catalog
(inches) Number
1
⁄2 BC-50G
3
⁄4 BC-75G
1 BC-100G
1
1
⁄4-1
1
⁄2 BC-125G
2 BC-200G
2
1
⁄2-3 BC-250G
3
1
⁄2-4 BC-350G
Type BC-G
Type BS-S
Domed Top Design Cover
Use:
To cover conduit body opening.
Material/Finish:
Stamped Steel Pre-Galvanized
Stainless Steel Screws
Natural Finish
Third Party Certification:
UL Listed:
E-18095
Suitable for wet locations when used
with gaskets, Type SGN or SG on
malleable iron conduit bodies.
CSA Certified:
LR-9795
Suitable for wet locations when used
with gaskets, Type SGN or SG on
malleable iron conduit bodies.
Applicable Third Party Standards:
UL Standard: 514A
CSA Standard: C22.2 No. 18
Fed Spec: A-A-50563
NEMA: FB-1, FB-2.10
Trade Size Catalog
(inches) Number
1
⁄2 BS-50S
3
⁄4 BS-75S
1 BS-100S
1
1
⁄4-1
1
⁄2 BS-125S
2 BS-200S
2
1
⁄2-3 BS-250S
3
1
⁄2-4 BS-350S*
* Flat Top Design Cover
Spec 5
™
Covers & Gaskets
For O-Z/Gedney Malleable Iron Conduit Bodies
Type BS-S
Type SG & SGN
Solid Cover Sealing Gasket
Use:
To provide a worry-free, raintight seal when
used with Type BS or BC covers.
Material:
Velbuna Composition
Closed-Cell Neoprene Foam Gasket
Temperature Rating: 212°F/100°C
Note: UL/CSA not applicable.
Catalog Catalog
Trade Size Number Number
(inches) Velbuna Neoprene
1
⁄2 SG-50 SGN-50
3
⁄4 SG-75 SGN-75
1 SG-100 SGN-100
1
1
⁄4-1
1
⁄2 SG-125 SGN-125
2 SG-200 SGN-200
2
1
⁄2-3 SG-250 SGN-250
3
1
⁄2-4 SG-350 SGN-350
Type SG & SGN
3- Section A.indd 4 06/16/2008 9:30:46 AM