Cut Sheet
AB2 AB2
Effective December, 2007
Copyright 2007
800-621-1506
www.o-zgedney.com
Spec 5
™
Malleable Iron Conduit Bodies
Type LR
Type LL
Type TB
Spec 5
™
Malleable Iron Conduit Bodies
For Rigid Conduit & IMC
Types LL, LR, TB, X, C
Use:
To provide access to conductors for pulling,
splicing, maintenance and future changes/
upgrades. Allows connection of straight
conduit runs, branch conduit runs and 90°
bends.
Features:
• Tapered threaded hubs (NPT).
• Raintight when used with gasketed
covers.
• Malleable iron suitable for use in con-
crete.
• For covers and gaskets, see Pages AB4
and AB5.
• Complete interchangeability with other
manufacturers’ style “5” or “35” Conduit
Bodies.
• Internal volume and maximum wire
clearly marked on castings.
Material/Finish:
Malleable Iron/
Zinc Electroplated Aluminum Enamel
Optional Finish:
For additional corrosion protection, specify
Hot Dip Galvanized. Add suffix “G” to
standard catalog number. Contact your
local representative for pricing and
availability.
Third Party Certification:
UL Listed E-18095
Suitable for wet locations when used
with gasketed covers.
CSA Certified: LR-9795
Suitable for wet locations when used
with gasketed covers.
Applicable Third Party Standards:
UL Standard: 514A
CSA Standard: C22.2 No. 18
Fed Spec: A-A-50563
NEMA: FB-1, FB-2.10
Dimensional Data:
See Pages AB6 - AB8
Note: Conduit bodies are suitable for use in
Class I, Div. 2 hazardous locations per NEC
Section 501-4(B).
Catalog
Number
Trade Size Malleable Iron
(inches) Zinc Plated
1
⁄2 LL-50
3
⁄4 LL-75
1 LL-100
1
1
⁄4 LL-125
1
1
⁄2 LL-150
2 LL-200
2
1
⁄2 LL-250
3 LL-300
3
1
⁄2 LL-350
4 LL-400
1
⁄2 LR-50
3
⁄4 LR-75
1 LR-100
1
1
⁄4 LR-125
1
1
⁄2 LR-150
2 LR-200
2
1
⁄2 LR-250
3 LR-300
3
1
⁄2 LR-350
4 LR-400
1
⁄2 TB-50
3
⁄4 TB-75
1 TB-100
1
1
⁄4 TB-125
1
1
⁄2 TB-150
2 TB-200
1
⁄2 X-50
3
⁄4 X-75
1 X-100
1
1
⁄4 X-125
1
1
⁄2 X-150
2 X-200
1
⁄2 C-50
3
⁄4 C-75
1 C-100
1
1
⁄4 C-125
1
1
⁄2 C-150
2 C-200
2
1
⁄2 C-250
3 C-300
3
1
⁄2 C-350
4 C-400
Type X
Type C
3- Section A.indd 2 06/16/2008 9:30:44 AM