Cut Sheet

BA37 BA37
Effective
December
, 2007
Copyright 2007
800-621-1506
www.o-zgedney.com
Hazardous Location Fittings & Outlet Boxes
Trade Catalog Catalog Dim. in Inches
Size Number Number Body Socket
(inches) Steel/Iron Aluminum Thk. Size
1
⁄2 PLG-50R PLG-50RA
1
⁄2
3
⁄8
3
⁄4 PLG-75R PLG-75RA
1
⁄2
1
⁄2
1 PLG-100R PLG-100RA
3
⁄4
1
⁄2
1
1
⁄4 PLG-125R PLG-125RA
3
⁄4
3
⁄4
1
1
⁄2 PLG-150R PLG-150RA
3
⁄4
3
⁄4
2 PLG-200R PLG-200RA
3
⁄4 1
2
1
⁄2 PLG-250C PLG-250CA 1
1
⁄8 n/a
3 PLG-300C PLG-300CA 1
1
⁄4 n/a
3
1
⁄2 PLG-350C PLG-350CA 1
1
⁄4 n/a
4 PLG-400C PLG-400CA 1
1
⁄4 n/a
5 PLG-500C 1
3
⁄8 n/a
6 PLG-600C 1
1
⁄2 n/a
Type PLG
Use:
To close up a taped hole or hub
Features:
Threaded (NPT)
Material/Finish:
1
⁄2” - 1” Steel/Zinc Electroplated or
Copper-free Aluminum
1
1
⁄4” - 6” Malleable Iron/Zinc Electroplated
or Copper-free Aluminum
Third Party Certification:
UL Listed: E-34997
Suitable for wet locations.
UL Listed for hazardous location
use as follows:
PLG-50R through PLG-100R;
PLG-50RA through PLG-100RA:
Class I, Div. 1, 2, Groups A, B, C, D
Class I, Zone 1, 2, Groups IIA, IIB,
IIC
Class II, Div. 1, 2, Groups E, F, G
Class III
PLG-125R through PLG-200R,
PLG-125RA through PLG-200RA
PLG-250C through PLG-400C:
Class I, Div. 1, 2, Groups B, C, D
Class I, Zone 1, 2, Groups IIA, IIB + H
2
Class II, Div. 1, 2, Groups E, F, G
Class III
PLG-250CA through PLG-400CA:
Class I, Div. 1, 2, Groups C, D
Class I, Zone 1, 2, Groups IIA, IIB
Class II, Div. 1, 2, Groups E, F, G
Class III
PLG-500C, PLG-600C:
Class I, Div. 1, 2, Group D
Class I, Zone 1, 2, Group IIA
Class II, Div. 1, 2, Groups E, F, G
Class III
CSA Certified: 009795
Applicable Third Party Standards:
UL Standard: 886
CSA Standard: C22.2 No. 30
NEC Articles 500-503 & 505
Type PLG-50R—Type PLG-200R
Type PLG-50RA—Type PLG-200RA
(Internal Recessed)
Type PLG-250C— Type PLG-600C
Type PLG-250CA—Type PLG-400CA
(Patented)
Threaded Insert Plugs
For Outlet Boxes & Hubs