Cut Sheet

HA1 HA1
Effective December, 2007
Copyright 2007
800-621-1506
www.o-zgedney.com
Strain Relief Connectors
Grip-Tite
®
Strain Relief Connectors
Type SR
Straight
Use:
To secure and seal cords or cables entering
enclosures or raceways.
Features:
• Grip-tite style - 2-piece internal design
features a nylon gripper for exceptional
pullout protection and a neoprene grommet for
a moisture-proof seal (up to 1” dia. cord range).
• Dual-grommet style - for over 1” dia. cord
range. Removable insert allows for wider
range of cable diameters within single fitting
• Simple installation, cord can be installed
without disassembly of the fitting
• Liquidtight/Oiltight/Raintight
• UL Listed NEMA 4, 6 & 12 when installed
into a NPT threaded entry or UL Listed
conduit hub (sizes 1
1
⁄4” and larger require
thread sealant).
• Rated at 90°C
• Suitable for NEMA 4 enclosures and other
wet locations
• Male tapered thread NPT
• Slim diameter profile allows close spacing
between connectors
• Furnished complete with sealing ring and
locknut
• Colored gripper allows for easy identification
Material:
Malleable Iron Body & Gland Nut,
Nylon Gripper, Neoprene Grommet, PVC
or Buna-N Sealing Ring, Steel Locknut
Finish:
Zinc Plated on Body, Gland Nut and
Locknut
Optional Finish:
Mechanical Galvanized
Contact your local representative
Third Party Certification:
UL Listed: E-11857
CSA Certified: 009795
Applicable Third Party Standards:
UL Standard: 514B
CSA Standard: C22.2 No. 18
Fed. Spec: W-F-406E
Notes:
Suitable for use in Hazardous Locations under
NEC Sec. 501-4(b), 502-4(a) (2), and 503-3(a).
For Class I, Div. 2, Class II, Div. 1, 2, and Class
III, Div. 1, 2.
Dimensions in Inches Dimensions in Inches
Catalog Cord Range Hub Throat Body Max
Number Min. Max. Size Style Color I.D. Length Dia.
SR-50-250 .156 .250
1
⁄2 Red .53 1
1
⁄4 1
3
⁄8
SR-50-375 .250 .375
1
⁄2 Grip- White .53 1
1
⁄4 1
3
⁄8
SR-50-500 .375 .500
1
⁄2 Tite Blue .53 1
1
⁄4 1
3
⁄8
•SR-50-625 .500 .625
1
⁄2 Brown •.61 1
1
⁄4 1
3
⁄8
SR-75-250 .156 .250
3
⁄4 Red .53 1
1
⁄4 1
3
⁄8
SR-75-375 .250 .375
3
⁄4 White .53 1
1
⁄4 1
3
⁄8
SR-75-500 .375 .500
3
⁄4 Grip- Blue .53 1
1
⁄4 1
3
⁄8
SR-75-625 .500 .625
3
⁄4 Tite Brown .75 1
1
⁄4 1
3
⁄8
SR-75-750 .625 .750
3
⁄4 Yellow .78 1
1
⁄4 1
1
⁄2
•SR-75-875 .750 .875
3
⁄4 Purple •.81 1
1
⁄4 1
3
⁄4
SR-100-750 .625 .750 1 Yellow .78 1
1
⁄4 1
3
⁄4
SR-100-875 .750 .875 1 Grip- Purple .96 1
1
⁄4 1
3
⁄4
SR-100-1000 .875 1.000 1 Tite Grey 1.05 1
1
⁄4 1
5
⁄8
SR-125-1000 .875 1.000 1
1
⁄4 Grey 1.20 1
3
⁄8 2
1
⁄8
•SR-100-1125 1.000 1.125 1
Single Grommet
•1.05 1
3
⁄8 1
1
⁄2
•SR-125-1375 1.000 1.375 1
1
⁄4 •1.35 1
5
⁄8 2
1
⁄2
SR-150-1375 1.000 1.375 1
1
⁄2 1.38 1
5
⁄8 2
1
⁄2
•SR-150-1750 1.375 1.750 1
1
⁄2 •1.53 1
5
⁄8 3
SR-200-1750 1.375 1.750 2 Dual 1.59 2
1
⁄8 3
Grommet
SR-250-2000 1.625 2.000 2
1
⁄2 2.50 2
1
⁄2 4
SR-250-2250 1.875 2.250 2
1
⁄2 2.50 2
1
⁄2 4
SR-300-2250 1.875 2.250 3 2.50 2
1
⁄2 4
1
⁄2
SR-300-2500 2.125 2.500 3 2.50 2
1
⁄2 4
1
⁄2
Type SR-50-250
•Remove enough jacket to get conductors through throat I.D.