Installation Instructions, Wood Post Anchors 30180 T4-600 24" 4x4 30160 T4-850 34" 4x4 30200 C4-850 34" 4x4 30380 T46-850 36" 4x6 30400 T6-850 36" 6x6 30700 MB-24 24" 4x4 30410 T6-700 32" 6x6 Accessory-Deck Plate 50880 OD-T4 12"x12" Typical Installation with 50880 Deck Plate Installation Instructions, Wood Post Anchors V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 .
142 5.59 30410 [813] 32.00 149 5.88 30400 102 4.04 [917] 36 30180 [609] 24 99 3.90 150 5.91 30380 109 4.29 30200 [863] 34 [914] 36 102 4.04 100 3.95 30160 [863] 34.00 30700 [732] 28.83 Overview Installation Instructions, Wood Post Anchors V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
1 309 12 plate can be painted to match black post anchors with automotive spray can bedliner 44.45 1.75 Accessory: 50880 Installation Instructions, Wood Post Anchors V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
polyurethane adhesive injection hole Post securing options • #10 x 1-1/4" panhead screw mounting holes (screws not included) • Polyurethane adhesive; 3-4 squeezes on chauk gun applicator inside "injection hole" • Both methods above notes: • post anchor may be driven into any desired depth. • recommend using polyurethane adhesive on applications where securing holes are below surface level to prevent post rot. 30160 shown Typical Installation Instructions, Wood Post Anchors V2.
post level #50740 (sold separately) not installed while driving sledge hammer (not included) scrap piece 50880 (sold separately) check angle every 1" repeat until 1/2 way sledge hammer installation Installation Instructions, Wood Post Anchors V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
post level #50740 (sold separately) jack hammer (rental) not installed while driving check angle every 1" repeat until 1/2 way JDK installation Installation Instructions, Wood Post Anchors V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
post level #50740 (sold separately) upper section slides up & down to drive post anchor not installed while driving check angle every 1" repeat until 1/2 way MDK installation Installation Instructions, Wood Post Anchors V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
polyurethane adhesive 8x flathead screw (not supplied) Method 1: halfway depth with screws & adhesive Installation Instructions, Wood Post Anchors V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
8x flathead screw (not supplied) Method 2: ground level depth with screws Installation Instructions, Wood Post Anchors V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
(4x) lag bolt (not supplied) Method 3: halfway depth with lag bolts Installation Instructions, Wood Post Anchors V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
polyurethane adhesive Method 4: full depth with adhesive Installation Instructions, Wood Post Anchors V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
Idea's Installation Instructions, Wood Post Anchors V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
with 50880 Installation Instructions, Wood Post Anchors V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.