Installation Guide

Below Shown Actual Size

1. Axel Support Tabs

2. Wheels

3. A-Frame Right Hand

4. A-Frame Le Hand

5. Chain with Hooks

6. Post Clamp

7. Top A-Frame Brace with Handle

8. Boom A-Frame Brace

9. Coer Pins

10. Bolts (Qty 6)

11. Large Washers (Qty 6)

12. Nuts (Qty 6)

13. Axel

Package Contents (Puller Frame)

PAGE 1
Package Contents (Puller Frame) 1. Axel Support Tabs 2. Wheels 3. A-Frame Right Hand 4. A-Frame Left Hand 5. Chain with Hooks 6. Post Clamp 7. Top A-Frame Brace with Handle 8. Bottom A-Frame Brace 9. Cotter Pins 10. Bolts (Qty 6) 11. Large Washers (Qty 6) 12. Nuts (Qty 6) 13.
PAGE 2
Assembly Instructions (Puller Frame) 12. 10. 7. 3. 3. 3. 3. 4. 3. 4. 11. 13. 1. 1. 13. 1. 13. 11. 13. 2. 2. 2. 2. 13. 11. 13. 4. 2. 9. 11. 3. 13. 10. 13. 9. 8. 13. Stand a-frame right hand (3) up making sure that axel support tabs (1) are facing towards the outside of the frame. Position top a-frame brace with handle (7), insert two long bolts (10) and hand tighten a nut (12) on each. Repeat step for left side of a-frame.
PAGE 3
Package Contents (48″ Farm Jack) 1. Jack Assembly 2. Jack Support Tabs (Qty 4) 3. Long Bolts & Nuts (Qty 9) 4. Short Bolts & Nuts (Qty 2) 5. Top A-Frame Brace (separate box) 6.
PAGE 4
Assembly Instructions (48″ Farm Jack) Jack support tabs (2) must be attached to both the top and bottom a-frame braces (5) & 6) with 4 long bolts & nuts (3). Leave bolts loose until jack assembly is in position. Hand tighten bolts ONLY. Attach jack assembly (1) to the frame by positioning between jack support tabs (2) as shown and inserting two short bolts & nuts (4) through the jack support tabs (2) attached to the top and bottom braces (5) & (6). Tighten ALL bolts.