With Smart LCD & Remote Control Model No: OZF1 The images in this manual are for illustration purposes only and may vary slightly from actual product.
Important Safety Instructions Thank you for purchasing the Ozeri Ultra 42” Fan. This product has passed extensive quality assurance tests for residential use. Every care has been taken to ensure that it reaches you in perfect condition.
person in order to avoid danger. Do not use this fan if it falls and/or becomes damaged in any way. If the fan becomes damaged, it must be replaced by the person in order to avoid danger. Do not use this fan outside, or in any commercial, industrial or agricultural setting. This fan is only for residential use. Do not use this fan with any solid state speed control devices. Do not use this fan in a damp area such as a bathroom.
Parts of the Fan 1. Remote Control Compartment with Control Panel 2. LCD Display 3. Grille 4. Extension Column (can be used to extend the height of the fan) 5. Base 6. Remote Control Assembly Instructions Check contents – keep packaging and user instructions for future reference. NOTE: For shipping purposes, the support column and the base both have 2 separate halves which need to be assembled. STEP 1: Assemble the extension column by and snapping them together.
align the support column to the main fan body so that the screw holes on both pieces are matching. Secure with ¼”screws provided. STEP 4: in Step 3 in a similar fashion. Hold the base upright (the side with a smooth surface) and thread the power cord through the center hole. Bring it up to meet the extension column and ensure that the screw holes on both are aligned. Secure together with nut wing-nut screws provided. If using without the extension column, attach directly to main fan body.
Osc: To activate the oscillation function for widespread breeze distribution, simply press this function for a targeted breeze setting, press the button again. Timer+: This button sets the duration of operation before the fan automatically turns OFF. Pressing this button will increase the time of operation in 1 hour increments to a maximum of 12 hours. The total time selected is indicated by the light(s) illuminating at 1H, 2H, 3H, etc., on the LCD display.
Color LCD Display F F Active Note: For fans purchased in the USA, the LCD will display the room temperature in Fahrenheit. Guidelines for using the remote control remote control must be pointed towards the receiver on the fan in order to work. The remote control may not operate in a room where a heavy machine is operating. Do not block the line of sight between the remote control and the receiver. Handle the remote control with care.
Model Number: OZF1 120V / 60Hz Wattage: 55 Watt Oscillation Angle: 80˚ Weight: 4.70 kg (10.3 lb) Fan Plug Fuse Type: 2.5 Amp, 125 Volt Dimensions: D31cm x W31cm x H105 cm (H89 cm without extension column) Voltage: CAUTION: THIS FAN HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER). TO REDUCE THE RISK OF ELECTRICAL SHOCK, THIS PLUG IS INTENED TO FIT IN A POLARIZED OUTLET ONLY ONE WAY. MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE SLOT OF THE OUTLET. FULLY INSERT.
Cleaning Instructions 1. Always disconnect the cord from the electrical outlet before cleaning your fan. 2. Dust may be removed by using a vacuum cleaner along the back of the fan where the plastic grille covers the air intake. 3. Wipe the exterior surfaces of the fan occasionally with a damp cloth (not dripping wet) and dry thoroughly with a soft dry cloth before operating the fan. 4. Do not use harsh cleaners or materials to clean this unit, doing so will cause damage.
PROBLEM Fan is not turning on. PROBABLE CAUSE SOLUTION A. Fan is not A. Ensure unit is in the OFF plugged into a position. Plug in unit 120V AC, 60Hz and attempt to turn on polarized outlet/ again. receptacle. B. Please check your B. Breaker/fuse has electrical box to been tripped. has not been “tripped”. C. Fuse inside plug Ensure unit is in OFF of fan is blown. position. Plug in unit and attempt to turn on again. Attempt to plug unit in another receptacle in the house C.
WARRANTY INFORMATION Your Ozeri Ultra Fan TM is warranted to the original owner for 1 year from the date of purchase against defects in material and workmanship under normal use and service. Should your Ozeri Ultra Fan prove defective within 1 year from the date of purchase, return the defective product, freight prepaid along with an explanation of the claim to “Ozeri.” Please pack your Ozeri Ultra Fan carefully to avoid damages in transit.