User Manual

5
align the support column to the main fan
body so that the screw holes on both pieces
are matching. Secure with ¼”screws provided.
STEP
4:
in Step 3 in a similar fashion. Hold the base
upright (the side with a smooth surface) and
thread the power cord through the center hole.
Bring it up to meet the extension column and
ensure that the screw holes on both are aligned.
Secure together with nut wing-nut screws
provided. If using without the extension column, attach
directly to main fan body.
COMPLETED FAN (WITH EXTENSION COLUMN)
CAUTION: THIS FAN MUST OPERATE IN THE UPRIGHT
POSITION ONLY. DO NOT LAY FAN ON ITS SIDE OR IN
ANY OTHER POSITION. DOING SO MAY CAUSE DAMAGE
TO THE FAN AND/OR PERSONAL PROPERTY. DO NOT
USE THIS FAN WITHOUT ITS BASE.
Operating Instructions
1. Remove the cable tie and unravel the cord set before
operation.
2. DO NOT use outdoors.
3. Plug fan into a 120v, 60Hz outlet.
The control panel and the remote of this fan are equipped
with an LCD display and 6 functions (Power, Speed,
Oscillation, Timer+, Timer- and Mode). For your convenience,
the buttons on the remote are designed to function in the
same way as the keys on the fan’s control panel. The LCD
display has lights that illuminate to indicate the fan’s active
functions.
Press this button to power the fan ON. When the fan is
ON, the power light on the LCD display will be illuminated. Once
the fan is ON, you may proceed to set the following functions. To
power OFF, press this button again.