SDS

(Not suitable for this voltage), its service life will meet the requirements of
Table 1.
8.3. 5 Leakage resistance inspection
Check the leak resistance. Under the condition of no cover, place it at a 40-
watt fluorescent lamp 1 meter above and 30 cm away from the eyes to observe the
smooth and clean surface of the battery without dirt.
9. Quality Assurance
(1) If it is confirmed that the product has defects in technology and materials,
please replace the product with Dongguan Shenneng Battery Technology Co., Ltd. Free
of charge. Please
Note that our company is only obliged to replace the battery. Other loss, damage,
destruction, including indirect costs or expenses, directly caused or
Indirectly caused losses of any nature, such as products that have been used or
cannot be used, are excluded.
(2) The battery must comply with the requirements of this specification when working.
Otherwise, Dongguan Shenneng Battery Technology Co., Ltd. Cannot assume any
responsibility, including (but not limited to) safety and customer claims, as well as
losses, damages, actions or legal proceedings, costs (legal or other aspects) caused
thereby.
(3) It is the customer's responsibility for the matching and reliability of batteries
in actual settings or component applications.
(4) Dongguan Shenneng Battery Technology Co., Ltd. Will not be responsible for the
following circumstances:
(I) Improper handling when using, installing or inspecting batteries.
(II) Failure to comply with the following instructions, precautions or warnings
mentioned in this product specification.
(III) Failing to comply with the instructions and suggestions of Dongguan Shenneng
Battery Technology Co., Ltd.
10. Other
Subject to RoHS instructions, this battery does not contain the following
chemicals: lead, mercury, cadmium, hexavalent chromium, bromide, flame retardant,
polybrominated biphenyl (PBB), polybrominated diphenyl ether (PBDE).