SDS

Material Safety Data Sheet
Report No.:STR13098102S Page 6 of 10
SEM.Test Compliance Service Co., Ltd.
3/F,Jinbao Commerce Building, Xin'an Fanshen Road,
Bao'an District, Shenzhen, P.R.C
Section 8 – Exposure Controls and Personal Protection
Engineering Controls Use local exhaust ventilation or other
engineering controls to control sources of dust,
mist, fumes and vapor.
Keep away from heat and open flame. Store in a
cool, dry place.
Personal Protective Equipment
Respiratory Protection: Not necessary under
normal conditions.
Skin and body Protection: Not necessary
under normal conditions, Wear neoprene or
nitrile rubber gloves if handling an open or
leaking battery.
Hand protection: Wear neoprene or natural
rubber material gloves if handling an open or
leaking battery.
Eye Protection: Not necessary under normal
conditions, Wear safety glasses if handling an
open or leaking battery.
Other Protective Equipment Have a safety shower and eye wash fountain
readily available in the immediate work area.
Hygiene Measures Do not eat, drink, or smoke in work area.
Maintain good housekeeping.
Section 9 - Physical and Chemical Properties
Form: Solid
Color: Gray
Physical
State
Odour: Monotony
Change in condition:
pH, with indication of the concentration Not applicable
Melting point/freezing point Not available.
Boiling Point, initial boiling point and Boiling
range:
Not available.
Flash Point Not available.
Upper/lower flammability or explosive limits Not available.
Vapor Pressure:
Not applicable
Vapor Density: (Air = 1)
Not applicable
SEM. Test Compliance