USER MANUAL 2
System RequirementS 6u 1. Operation System Windows XP / Windows Vista / Windows 7 / Windows 8 / Windows 8.1 2. Free USB 1.1/ 2.0 port 3. CD-ROM drive 4. 50 MB free hard disk space It’s all about evolution InstallatiOn InstructiOnS 1. Plug USB connector of ARGON OCELOTE to a USB port of your PC 2. Insert the enclosed driver CD into your CD-ROM drive (or download the driver from www.ozonegaming.com ) 3. Double click “Setup.exe” to start the installation program. Click “Next” to continue 4.
MOUSE CONFIGURATION 1. Advanced Settings: 1. Polling Rate Setting 2. On-To-Go Speed Setting, Speed of repeat mouse function (refer to 2.6 Mouse Function) 3.
2. BUTTON Settings: 1. MACRO MANAGER Macro is a series of desired keystrokes which can be recorded and assigned to the keyboard. In other words, it’s a series of key press and releases, in which every pressed keystrokes, released keystrokes, and delays are been recorded. The delay is the duration between the keys “press and release” or “release and press”, that is automatically recorded and output once the macro is assigned.
Create and Assign a Macro 1. Select a button and click ”Macro Manager” from the menu 6 2. In the pop-up window, click “NEW” and enter a name for the macro, then start to create the macro 3. Select the options of “Record Delays” and set the “Loop Times” from the right column if needed 4. Click ”Start Record” type the desired key combination and click “Stop Record” when you are finished. If needed “Right Click” on one of the keys in the sequence to edit it. Click “OK” to continue 5.
8 2. Multimedia 3. PrOfile Switching 1. Select a button and click ”Multimedia” from the menu 2. Select the desired function in the sub-menu and click “APPLY” to confirm the setting 1. Select a button and click ”Profile” from the menu 2. Select the desired function in the sub-menu and click “APPLY” to confirm the setting.
4. CPI/DPI Switching 5. WindOws Management 1. Select a button and click ”CPI Switch” from the menu 2. Select the desired function in the sub-menu and click “APPLY” to confirm the setting. CPI Cycle: Cycle Switching / CPI Up: DPI level + / CPI Down: DPI level - 1. Select a button and click ”Windows” from the menu 2.
6. MOuse FunctiOns 1. Select a button and click the desired mouse function in the menu: “Click”, “Menu”, “Wheel Click”, “Double-click”, “IE Forward”, “IE Backward”, “Scroll Up”, “Scroll Down”, “Tilt Left”, “Tilt Right”, “Fire Button”, “On-To-Go (This is a combination button used to get a continuous mouse function: Hold down this button together with any other button with an assigned mouse function to get a continuous repeated mouse function)”. 2. Then, click “APPLY” to confirm the setting 7.
8. ButtOn Off: Disable the buttOn functiOn 1. Select a button and click ”Button Off” from the menu 2. Then, click “APPLY” to confirm the setting 14 9. Assign a Launch Single mouse click to launch your chosen PC software 1. Select a button and click “Assign a Launch” from the menu 2. In the pop-up window, select the desired software from the folder and click “OK” to continue 3.
. WindOws Key 1. Select a button and click ”Windows Key” from the menu 2. Then, click “APPLY” to confirm the setting 16 11. OPEN DRIVER 1. Select a button and click ”Open Driver” from the menu for quick access to the Mouse Configuration Driver 2.
3. PrOfile Setting 1. Create PrOfile Each configuration profile corresponds to a personalized mouse setting. Therefore, this powerful feature allows you to create specific configuration profiles for each game. The defined configuration profile can be saved on your PC (we strongly suggest that you name the configuration file according to the name of the related game). The driver provides 5 profiles: Profile 1 to Profile 5.
20 2. LOad PrOfile 3. SAVE PrOfile 1. Click “Load Profile” to execute a previous setting of a certain profile 2. Select the profile to be imported and click “Open” in the pop-up window 3. Click “APPLY” to apply the changes 1. Select the profile that you want to save and click “Save Profile” 2. In the pop-up window, give a personalized name to the profile and click “Save” 3.
22 4. Edit PrOfile 4. Sensitivity Setting 1. Click “Edit Profile” to modify your personalized PROFILE NAME and EXECUTABLE GAME PATH 2. Click “OK” to confirm the changes 3. Click “APPLY” to apply the changes 1. Horizontal X and vertical Y - direction moving speed settings 2. Click on “XY synchronous working” for a synchronous direction moving option 3. DPI Settings: Click on “Orange Circle” for DPI lock / Set your personalized DPI using the sliding Bar 4.
5. System Settings 6. Light Settings 1. 2. 3. 4. 5. 1. Choose Single Color to select from one of the default colors or Select Custom Color to select a specific color of your choice. You can chose from 16.8 million RGB colors. 2. Choose Brightness ON/OFF and select the brightness amount from 0 to 100. Or Choose Breathing Effects ON/OFF and select the speed of the breathing effect. 2.
BUTTONS LAYOUT 1 9 3 2 8 4 5 6 7 4 DEFAULT BUTTON ASSIGNMENT 1 - Click 2 - Menu 3 - Wheel Click 4 - IE Forward 5 - IE Backward 6 - CPI Up 7 - CPI Down 8 - Scroll Down 9 - Scroll Up k u 5 Left/Right Hand User Swap Via Software; search for BUTTON SETTINGS and choose from Hand Selection: (install the driver to assign different functions to each button) 26 27
ARGON DRIVER Please Download ARGON Driver from our website: www.ozonegaming.com INSTRUCTIONS: m 2 1. Plugin the USB connector of Argon into a free USB port. 2. Connect to the internet and enter www.ozonegaming.com 3. At the bottom of the page in the footer menu under “SUPPORT” click on “DOWNLOADS”. 4. Here you will see a list of products, look for Argon and download the DRIVER. It’s all about evolution 28 ©2014 OZONE Gaming Gear. All rights reserved.