User Manual

November 1999
M68333 Rev. A Tel-Link PMP - Sector Terminal Installation & Maintenance Manual 6-5
STEP 7. Secure the Mounting Bracket retaining nuts once course alignment is complete.
NOTE: If installing a 38 GHz system proceed to Step 10
STEP 8. Attach the ODU by positioning it to the back side of the Antenna Mount Assembly with
the help of a protruding supporting handle. Hook the handle and let the ODU hang in
place. Once positioned properly, snap tight the retaining clips mounted on the ODU to
the hook clips of the Antenna Mount Assembly (refer to Figure 6-6).
Figure 6-6 - Attaching ODU to Antenna Mount Assembly
STEP 9. Attach the ODU Tx and Rx waveguide assembly to the appropriate ports on the
Antenna Assembly. The Rx waveguide is the port closest to the center of the ODU.
Thumbscrews, at the antenna end of the waveguide, are used to attach the waveguide
assembly to the Antenna (refer to Figure 6-7)
Antenna
Assembly
Elevation
Adjustment
Support
Handle
Retaining
Clips