User Manual

November 1999
8-6 M68333 Rev. A Tel-Link PMP - Sector Terminal Installation & Maintenance Manual
8.2.5 DC Power Supply
DANGER! Before connecting the DC cable to the IDU, ensure that the protection fuse is removed to
prevent the application of power at this time.
8.2.5.1 ODU Power Supply Chassis
The ODU receives its power from the ODU Power Supply chassis via the Basic IDU chassis through an IFL
cable and may be measured at the center pin of the IFL when connected to the IDU Chassis (refer to Figure
8-4).
Figure 8-4 - Interconnecting of the ODU Power Supply to the Sector IDU