Instructions Manual

P.G. TM0026AE
NOTE IMPORTANT RATING INFORMATION
Manufacturer’s rated output power of this equipment if for single carrier
operation. For situations when multiple carrier signals are present, the
rating would have to be reduced as per Table 1-2, especially where the
output signal is re-radiated and can cause interference to adjacent
band users. This output power reduction is to be achieved by
reduction of input power.
TABLE 1-2 Rated Power Output for Linear Operation
(for intermodulation products 50 dB down)
The Total Composite output power in multiple tone or wideband signals shall NOT exceed the
following level or else it may result in improper operation of the device and cause interference.
Parameter Specification
Base Transmit (Downlink) Power: +6 dBm
Portable Transmit (Uplink) Power: +6 dBm
1-3