Manual

USB Professional (58 keys)
Product Manual
Model XP-05-USB-R
58 Keys
Designed, Sold, and Supported in USA
From P.I Engineering, The No Slogan Company
www.xkeys.com
Box Contents
This package contains:
1- X-keys Professional
1- Installation CD
1- Replacement key set (2 tall, 1 wide, 1 key puller)
1- Legend Sheet
1- Product Manual
Quick Start for Windows
1. Run the MacroWorks 3 (MW3) installation program from the enclosed disc.
2. Plug in the X-keys Professional and wait for Windows to recognize it.
3. Slide the programming switch (located on the upper right side of the X-keys)
up to open the MW3 programming window (or click on the MW3 taskbar icon
and select the device).
4. Press any switch on the Professional (or double-click on the key image) to
begin recording a macro.
5. Type keystrokes or select text, shortcut, or function. Multiple lines of
keystrokes, text, shortcuts, and functions may be entered on a single key.
6. Press the key again (or click Save) to complete programming.
7. When finished, slide the programming switch down to close the
programming window.
To quickly learn how to use MW3 watch the brief tutorials on the disc or on our
website. Consult the MW3 help file for complete instructions and tips on
programming and using your X-keys.
Mac Users
Install ControllerMate for X-keys from the enclosed disc or visit the Apple page
in the Software section of our website for a free download. ControllerMate for
X-keys is published by OrderedBytes in partnership with P.I. Engineering. For
full programming instructions and support, please visit
www.orderedbytes.com/controllermate/.