Overview -1 Package Contents «= -2 Before Getting Started -3 Installation -3 Step 1: Mount Outside Antenna -3 Step 2: Mount Inside Antenna = 0 1:Mount the Panel Antenna 0 2:Mount the Magnetic Antenna -6 Step 3: Mount the Signal Booster -7 Step 4: Power Up -7 LED INDICATORS --8 Measuring Booster Performance .
Before Getting Started Before you install the signal booster and antennas, please check the frequency of your cell phone : The booster can work well only if your cell phone works on same frequency band as the booster. Please check which band your cell phone uses firstly using the methods below: {1). For iPhone: Dial *3001#12345#*, then press Call button Click ‘Serving Cell Info' Check 'Freq Band Indicator’; {2).
Option 1: Mount the Panel Antenna The Inside Panel Antenna is directional with a 120-degree reach, it should be mounted on a vertical surface or wall where there are no materials that could obstruct signals. Note: 1. The Inside Panel Antenna should be facing the area signal is needed and away from the outdoor antenna {See “Aiming Panel Antenna” below). 2. The installation location is the approximate height of normal cell phone use. Installation Steps: 1.
Step 3: Mount the Signal Booster Mount the booster within a cabinet or on anther panel closet a power source. Please avoid excessive heat, direct sunlight, or moisture, as well as, provide proper ventilation. Installation Steps: 1.Connect the cable of the Inside antenna to the port on the side of the booster labeled "INSIDE". 2.Route the cable from the outside antenna inside and connect it to the port on the booster labeled “OUTSIDE”.
2.For iPhone 8 or other later models: {1} Key in *3001#12345#* (including the stars and pound signs), press the call button {2} Choose: LTE, then select: Serving Cell Meas {3} Scroll down to: rsrp0 The result number should be a negative number, in a range from around 40 to -140. A number closer really strong signal, while a number closer to -140 is a really poor signal. Anything between -40 and -80 is very good and you should’ t have any signal problems.
Warranty 30-day money-back guarantee, 3-month free replacement, 5-year manufacturer warranty Our Signal Boosters are warranted for 5 years against defects in workmanship or materials. Warranty cases may be resolved by returning the product directly to the manufacturer at the consumer’ s expense, with a dated proof of purchase and an Order Number supplied. We shall either repair or replace the product at its option.
