Use and Care Manual

ManualsBrandsP3 ManualsElectricalKill-A-Watt 10-Outlet Energy-Managing Surge Protector

P4330 Kill A Watt

Operating Manual

Thank you for purchasing the P4330 Kill A Watt™ PS Relocatable Power Tap / Transient

Voltage Surge Suppressor. This operating manual will provide an overview of the product,

safety instructions, a quick guide to operation, and complete instructions for correct usage.

Take the time to completely review these instructions as well as all safety warnings to ensure

your best use of the product.

Now you can protect your valuable electronics and find out what they are actually costing you.

Simply connect these appliances to the Kill A Watt™ PS and it will assess how efficient they

are while the built-in surge protection keeps them safe. Advanced features such as over

current, over voltage, and no load detection provide clean safe power to your expensive

equipment. Check the quality of your power by monitoring Voltage, Amperage, KWH, Current

Leakage and more. Now you’ll know how much power your entire computer of home theater

system is using. With the innovative Kill A Watt™ PS you’ll have peace of mind in more ways

than one.

Summary of content (12 pages)

PAGE 1
P4330 Kill A Watt TM PS Operating Manual Thank you for purchasing the P4330 Kill A Watt™ PS Relocatable Power Tap / Transient Voltage Surge Suppressor. This operating manual will provide an overview of the product, safety instructions, a quick guide to operation, and complete instructions for correct usage. Take the time to completely review these instructions as well as all safety warnings to ensure your best use of the product.
PAGE 2
Safety Instructions Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. Follow Instructions – All operating and use instructions should be followed. Cleaning – Unplug this product from the wall outlet before cleaning.
PAGE 3
Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet.
PAGE 4
Product Functions: 1. 2. 3. 4. 5. Power Strip: 10 outlets, Spike-free switch. Multi-Meters: Voltage, Current, Active Power, Power Factor, KWH, Leakage Current, Elapsed Time. Protection: Abnormal Voltage, Over Current, Over Load, Surge. Programmable Breaker Current: User adjustable 2, 5, 10, or 15A breaker. NFB (No Fuse Breaker): Over Load protection. Wall Mount Instructions (Optional) 1. 2. Use 3/4 inch no. 8 screws or similar. Space the 2 screws about 9 inches (285mm) apart according to the figure.
PAGE 5
Feature Locations 10 Normal Outlets NFB Short Breaker ON Elapsed Time KWH/Leakage OFF Watt/PF Max.Amps Volt/Amp Display Panel AC Voltage AC Power Kilo - Watt - Hour Up to date Max. No Appliance connected Over 15A Max Current Defect Detect Out of Range Voltage Elapsed Days Over Current Over current NO Load Over Load MAX REPLACE Abnormal Voltage MIN Surge OK Up to date Min.
PAGE 6
7. Pressing the Watt/PF Key will cycle through currently measured active power (Watts), power factor (%) and Maximum/Minimum measured values. 8. Pressing the KWH/Leakage key will cycle through cumulative kilowatt hours (KWH), currently measured leakage current (mA) and Maximum/Minimum measured values (leakage current only). 9. Pressing the Elapsed Time key will cycle through time in Days:Hours and Hours:Minutes. 10. Review the complete operating instructions to familiarize yourself with all features.
PAGE 7
Retained Output Mode: 1. If the power supply to the Kill A Watt PS unit is interrupted and then restored, the LCD panel will flash to alert the user to an interruption. Press any of the function keys to stop the LCD from flashing. The unit will resume the output mode at time of power interruption. If the unit was ON, when power was removed, the unit will be ON when power is restored. Meter Functions: 1.
PAGE 8
Protection Functions: 1. Max. Amps switch: This switch on the control panel allows the user to optionally select the maximum current (Amps) the unit will deliver to the attached appliances without automatically shutting off. Use a small screwdriver to select 2A, 5A, 10A or 15A (factory default). Setting Procedure: a. Use a small screwdriver to select 15A (factory default setting). b. Connect all appliances to the unit and operate appliances at their highest level. c.
PAGE 9
6. Ground OK, Wiring OK detection: When you connect the unit to a wall outlet, the unit will check the structure wiring to determine and wire faults. The unit checks the Line, Neutral and Ground wiring. Under normal conditions, “Ground OK” and “Wire OK” icons will display on the LCD. If Line or Neutral are in the wrong positions, the “Wire OK” icon will disappear. If the Ground wiring is not correct, both “Ground OK” and “Wire OK” icons will disappear. 7.
PAGE 10
Troubleshooting: Item Symptoms Action Description 1 LCD display is flashing Press any key 2 Over Current icon on LCD is flashing and audible alarm is sounded, output is off and the red LED in the OFF key is flashing Press Reset key (OFF key), check & remove the appliance which is drawing over current or reduce the number of appliances connecting to the unit or set a larger Max. Amps setting. Press ON key to restart 1. This is normal operation after you plug the unit into a wall outlet. 2.
PAGE 11
Specifications: ITEM ACCURACY Typ. Max. RANGE RMS voltage RMS current 108.0~132.0 Vrms 0.0~15.0Arms 0.1% 0.5% Active power 0.0~1980 Watt 1% KWH1 Power Factor Leakage Current 1 Elapsed Time Abnormal Voltage Under Voltage Protection 0.0~9999 KWH 0~100% 0~30mA 00Day/00Hour~9999Day/23Hour 00Hour/00Min~23Hour/59Min Output Off if Vac<98.4V (Rating-18%) Then On if Vac>102V(Rating-15%) Over Voltage Protection Output Off if Vac>135.
PAGE 12
P3 INTERNATIONAL CORPORATION LIMITED WARRANTY P3 INTERNATIONAL CORPORATION ("P3") warrants to the original retail purchaser only, that its product is free from defects in material or workmanship under the condition of normal use and service for a period of six (6) months from the date of purchase.