User Guide
Quick Start Guide:
Use these quick start instructions to get up and running in just a few
minutes. Be sure to review all the operating instructions later to ensure
full enjoyment of the product.
1. Connect the Kill A Watt™ EZ unit to the outlet and the appliance
to the unit
2. Press and hold the RESET key on the unit until “rESt” appears.
3. Press and hold the SET rate key until “Rate” is displayed and the
currently set rate ashes.
4. Press the UP and DOWN key to set your desired rate. For ex-
ample, if your utility charges you 10.6 cents per KWH, set the rate
until the unit displays $0.106.
5. Press the SET key again. “SAVE” will appear briey in the display.
6. To display the actual cost of power consumed or projected cost,
press the MENU key until “Cost” is displayed in the LCD.
7. Pressing the UP and DOWN key will cycle through the cost
projection periods. For example if the display indicates $2.34 and
“Month”, the unit is projecting that the attached appliance will
consume $2.34 worth of electricity in one month.
8. To display the power measurements press the MENU key until
“Volt” is displayed on the LCD.
9. To cycle through the various measurements press the UP and
DOWN key as desired. The measurement unit currently selected
will be indicated in the display.
10. To display the total consumed power in Kilowatt-Hours, press the
MENU key until “KWH” is indicated in the display.
11. Review the complete operating instructions to familiarize yourself
with all features.