EN

www.probare.at | 3 | © ViCOS 2013
(1) Enter | Main Menu | of P30 by touching ◄ button repeatedly
(2) Enter | Setup | menu by touching ▲ und ▼ buttons simultaneously for 3s
(3) Set correct date in sub-menu | Date/Time | Date |
(4) Set correct time in sub-menu | Date/Time | Time |
(5) Change menu language in sub-menu | P30 Setup |
(6) Adjust LC display contrast in sub-menu | P30 Setup | Display Contrast |
(7) Exit | Setup | menu by touching ◄ repeatedly
SETUP OF P30
When putting a P30 into operation for the first time or in case of discontinued supply of power in
between individual operations it is advised to set time and date of the built in real time clock. This
secures correct time stamping in the P30 log files. Please note that retrospective corrections of log
files are not possible. Further, menu language and display contrast may be set by the user at any
time.
To set up a P30, please follow the steps below:
Type micro-B socket:
External power supply
Type A socket:
USB memory
USB CONNECTIVITY
EXTERNAL POWER SUPPLY
Switch over from internal to external power supply can be done by simply plugging in a USB cable
connected to an external power source. This does not cause any operational interruption and is
very helpful in case data logging to a USB memory needs to be extended to a much longer time
frame, such as for documentation purposes.
REMARKS
Connect the P30 to a USB port that is compliant to the USB specification and that is able to
deliver 500mA of supply current. Other USB ports or USB hubs may cause problems with power
supply handling.
Batteries inserted in the battery compartment of a P30 are not charged from an external power
supply connected to the device.
SECURITY ADVICE
To externally power a P30 use the USB interface of a computer, the power supply shipped with
the P30 or the supply that is available as an accessory. Please note that usage of other external
power sources may cause severe damage to the unit itself as well as it may cause personal injury
to the user of a P30, which both explicitly is excluded from any warranty and / or product liability.
P30 QUICK START