Instruction Manual

PAASCHE® VLSTPRO Airbrush Components Page 4
ACCESSORIES
VL-1/4-OZ Metal Color Cup (7cc)
VLS-1-OZ Color Bottle Assembly (29cc)
VLS1 1 oz. Cover Assembly
H-99 1 oz. Glass Bottle (29cc)
VLS-3-OZ 3 oz. Bottle Assembly (89cc)
VLS3 3 oz. Metal Cover Assembly
H-108 3 oz. Glass Bottle (89cc)
PCVLS-3-OZ 3 oz. Plastic Cover & Metal Tube Assem. (89cc)
PCVLS3 3 oz. Plastic Cover & Metal Tube Assem.
H-108 3 oz. Glass Bottle (89cc)
VLPS-3-OZ 3 oz. Plastic Bottle Assembly (89cc)
VLPS3 3 oz. Plastic Cover & Tube Assembly
62-17P 3 oz. Plastic Bottle (89cc)
VLS-2-OZ Aluminum Cup Assembly (60cc)
VF-23 2 oz. Aluminum Cup (60cc)
NOTE:
3-JG Gasket for 3oz and 2oz bottles
5-G Gasket for 1 oz bottles
VLSTPRO BOTTLE ASSEMBLIES & CUP Recommended Compressors & Accessories
D500 AIR COMPRESSOR (1/8 H.P.) (ETL Listed)
Economical and suitable for all airbrushes spraying
properly thinned fluids. It is capable of delivering up to 35
P.S.I. operating pressure depending on airbrush being
used. The Paasche D500 is an oilless piston compressor.
It operates on 110-120 Volt, 1 phase, 60Hz, and delivers
.4 C.F.M. @ 20 P.S.I.
Shipping Weight: 8 lbs. (3.6kg)
D220R AIR COMPRESSOR (1/6 H.P.), with
Switch & R-75 Regulator
Economical and suitable for all airbrushes
spraying properly thinned fluids. It is capable of
delivering 30 - 45 P.S.I. operating pressure
depending on airbrush being used. The Paasche
D220R is an oilless diaphragm unit and comes
with the R-75 Regulator/Filter with gauge. It
operates on 110-120 Volt, 1 phase, 60Hz, and
delivers .7 C.F.M. @ 20 P.S.I.
Shipping Weight: 11 lbs. (5kg)
DA300R AIR COMPRESSOR (1/6 HP) with
Switch CSA approved & R-75 Regulator
1/8 H.P. Piston Compressor with Auto shutoff.
Compressor shuts off when airbrush is not in use.
Operating pressure is 20 - 30 P.S.I. depending on
airbrush being used, delivers up to 35 psi. 120
VAC, 1 Ph, 60 Hz, 1.4 A, 20L/Min. (0.7CFM),
Noise 53dB, 1720 rpm.
Shipping Weight: 9.14 lbs. (4.6 kgs)
DA400R AIR COMPRESSOR (1/6 H.P.)
1/6 H.P. Piston Compressor with Auto shutoff.
Compressor shuts off when airbrush is not in
use. Operating pressure 30 - 50 PSI
depending on airbrush being used, delivers
up to 55 psi.. 110-120VAC, 1 Ph, 60 Hz,
42L/Min. (1.48CFM), 1720 rpm. With R-75
Regulator & Moisture Trap included.
Shipping Weight: 12.2 lbs. (5.6 kgs)