Specification Sheet

PAC-audio.com

Pacific Accessory Corporation

Page 8

Rev: 2

Date:020922

Advanced Amplier Interface

for Select Ford Vehicles

AP4-FD31

Use of the AmpPRO App allows

you to do the following:

• Congure User Interface Options such

as:

• Minimum Volume Level

• Chime Volume Level

• Enable / Disable factory EQ

• Bass / Mid / Treble boost frequencies

and Q factor

• Update Product Firmware

• Read Firmware / Hardware Versions

You can download the Amp PRO app at :

http://aampglobal.com/appdownloads

AmpPRO App

PLEASE NOTE: These settings can be adjusted with the module installed in the vehicle, or on the bench. However, it is

recommended to make the adjustments with the module installed, and the factory radio on, so that the changes can be

heard.

Minimum Volume Level - This allows you to set the minimum volume level of the factory radio (factory radio volume level 1).

Chime Volume Level - This allows you to set the volume of the AP4 chimes (ie: park sensors).

3 Band EQ Enabled - This allows you to enable / disable the 3 band factory EQ.

Bass / Mid / Treble Freq / Q Factor - This allows you to set the center frequency that will be adjusted when setting the 3 band

factory EQ, as well as the Q Factor for each frequency. The Q Factor determines how many of the adjacent frequencies will be

60HZ 500HZ 7.5KHZ

80HZ 1KHZ 10KHZ

100HZ 1.5KHZ 12.5KHZ

120HZ 2.5KHZ 15KHZ

0.50 0.75

1.00 1.00

1.50 1.25

2.00 1.50

Bass Frequency Mid Frequency Treble Frequency

Available Frequencies and Q Factors

Bass Q Factor Mid Q Factor Treble Q Factor

0.75

1.25