Instruction Manual

Complete Radio Replacement with
Integrated Climate Control Retention for Select
2014–2020 Jeep Grand Cherokee
RPK4-CH4103
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 10
Rev: v.1
Date:041020
Part Five: Installing the New USB Hub
Mounting the New USB Hub
Mount the new USB hub by securing it to the
back of the storage bin. Use the four factory
T20 screws to mount it the same way that the
factory USB hub was mounted.
Step 1
First route the new USB hub cables
through the opening underneath the
storage bin area. Then, route the cables
through the sub-dash up to the area
behind the radio opening so they can
be connected to the aftermarket radio.
Connect the 12v outlet and reinsert the
storage bin back into the dash cavity.
Step 1
Routing the USB Hub Cables / Preparing the USB Hub Ports
Remove the silicon dust caps from the
ports on the new USB hub that will be
used by the aftermarket radio. If the
aftermarket radio does not support some
of the ports on the new USB hub, leave
those dust caps in place. Reassembly is
done in the reverse order of dissasembly.
Step 2