Instruction Manual

Complete Radio Replacement with
Integrated Climate Control Retention for Select
2014–2020 Jeep Grand Cherokee
RPK4-CH4103
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 15
Rev: v.1
Date:041020
Setup and Testing
RPA-16P5V V1
V Out
V - 2
V - 1
V - 5
V - 4
V - 3
Video Output
Video Input1
Video Input2
Video Input3
Video Input4
Video Input5
Black - Camera Ground Out
RPA-16P5V
(Optional Multi Camera Harness)
Red - Camera 12v Out (800mA)
To aftermarket radio’s
camera input
Signal from aftermarket
cameras
With the addition of the optional RPA-16P5V harness, the
RPK4-CH4103 supports the display and control of up to 5
cameras. The RPA-16P5V replaces the RPA-16P1V camera
harness that is included with the RPK4-CH4103.
Additional cameras can be connected to any of the 4
separate video inputs (video input 1 is reserved for the
reverse camera). Camera input and control are adjustable
through the settings menu on the LCD display on the dash
bezel. The provided power and ground connections are
active when the vehicle is on. Use these leads to power your
aftermarket camera(s) (up to 800mA total). If the cameras
require more than 800mA, please use an external relay. See
page 17 for setup and operation.
Using Multiple Cameras
Verify that all screens and functions are present through the 5.2” display
Options Screen Climate Control* Camera Control
Information Screen Vehicle Gauges 1
Vehicle Gauges 2
Enter the Installation Settings menu by pressing and holding the Vehicle Settings icon on the Options screen.
Available Installation Settings
Menu Options
Press and Hold Vehicle
Settings
*Dual Zone Climate shown, exact
appearance may vary based on vehicle.