Instruction Manual

Complete Radio Replacement with
Integrated Climate Control Retention for Select
2014–2020 Jeep Grand Cherokee
RPK4-CH4103
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 17
Rev: v.1
Date:041020
Setup and Testing (cont.)
Options Screen Climate Control Camera Control
Swipe left to the camera control screen
Step 5
Setting Automatic Camera Triggers
(Front, Left and Right Cameras Only)
Open Camera Settings
Step 1
Select Desired Camera
Step 2
Select the camera trigger.
Step 3
Verify the camera input(s) have been setup
properly. Exit the settings by pressing the back
button until you are on the options screen.
Step 4
From the set of options, touch the label that
matches the image displayed on the radio. Repeat
steps 2 and 3 for each camera that is being added.
Step 3
Touch the camera input (Camera 2, 3, 4, 5) you wish
to activate. The radio will display the image of the
camera connected to the selected camera input.
Step 2
Open Camera Settings
Step 1
To edit the camera settings, from the Installer Settings menu, do the following:
Verify the new camera icon(s) are displayed
on the screen and activates the camera when
touched.
Step 6