Instruction Manual

Complete Radio Replacement with
Integrated Climate Control Retention for Select
2014–2020 Jeep Grand Cherokee
RPK4-CH4103
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 18
Rev: v.1
Date:041020
The selectable triggers for the Left and Right cameras are
independently selectable and are:
Blindspot Trigger:
• Turn Signal
• Turn Signal and Over 0 MPH
• Turn Signal and Over 10 MPH
• Turn Signal and Over 20 MPH
• Turn Signal and Over 30 MPH
• Turn Signal and Over 40 MPH
• Double Tap Turn Signal
• Manual Only
Setup and Testing (cont.)
The selectable triggers for the Front camera are:
• Auto Turn On Into Drive - The Front camera will
come on when the vehicle is placed into drive and will
stay on for 30 seconds or until the congured speed
threshold is reached.
• Steering Wheel Angle Mode - The Front camera will
turn on when the steering wheel is greater than the
selected angle and the vehicle’s speed is less than the
selected speed threshold.
• Speed Threshold - The Front camera will come
on when the vehicle’s speed is less than the speed
selected here and greater than the SW Angle
threshold.
• Steering Wheel Angle Threshold - The Front camera
will come on when the steering wheel angle is greater
than what is selected here and less than the selected
speed threshold.
Steering Wheel Controls
IMPORTANT! The interface comes pre-programmed with all factory SWC functions and does not
require programming unless you wish to re-assign the SWC functions, or utilize short press/long
press dual command functionality. See below for information on custom programming the steering
wheel controls, including adding short press/long press operation.
Alpine
JVC
Kenwood
Clarion
Pioneer
Sony
Fusion
Volume + Volume + Volume + Volume + Volume + Volume + Volume + Volume +
Volume - Volume - Volume - Volume - Volume - Volume - Volume - Volume -
Source Source Source Source Source Source Source Source
Track + Track + Track + Track + Search + Track + Track + Track +
Track - Track - Track - Track - Search - Track - Track - Track -
Preset + Preset + Band/Disc Up Disc/Radio + Band Preset + Preset + Audio
Voice Mute Mute Mute Mute Mute Mute Mute
Phone/Answer
Receive
Receive
Off Hook
Send
Answer
Answer
Power
Note: 2 Wire Resistive
radios do not have
a specic default
programming order
and cannot be custom
programmed through
the RPK4-CH4103.
Please refer to the
owner’s manual of
your particular radio
for programming
instructions.
Custom SWC Programming
Example: To program the Track Up button to perform the Track Up function with a quick press and perform the Preset Up
function when the button is pressed and held for more than 1 second, from the SWI settings menu, do the following:
Open SWI Settings
Step 1
Step 2
Touch the display on the Track Up Long
Press function that is currently labeled as Not
Assigned.