Instruction Manual
Complete Radio Replacement with
Integrated Climate Control Retention for Select
2014–2020 Jeep Grand Cherokee
RPK4-CH4103
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 19
Rev: v.1
Date:041020
Custom SWC Programming Tips:
Each SWC radio function can be used only once. If you try
to use a radio function that is already assigned to a button,
the pre-existing button's radio function will change to "Not
Assigned", and the radio function will be set to the new
button. For example, if you were to try to program Volume
Up to the Mode button, the Volume Up button would now be
set to "Not Assigned", and the Mode button would be set to
Volume Up.
Setup and Testing (cont.)
Step 3
Scroll to nd and press the Preset Up option.
Audio Adjustments
If the vehicle has a factory amplier, the 5.2” display has the ability to adjust the factory amplier’s audio settings.
Amplier Audio Settings
Open Factory Amplier Settings
Step 1
Make Adjustments
Step 2
Real Time Fade On = Fading from aftermarket radio
Real Time Fade O = Fading from this menu only
Note: Typical Gain Setting will have the gain at or near the top.
Chime Speaker Adjustment
Open Advanced Settings
Step 1
Adjust Chime Speaker
Step 2
The chime speaker adjustment allows you to control what chimes will be sent to the RPK4-CH4103-supplied chime
speaker and the volume of the chimes from the speaker. If there is no factory amplier, or if an aftermarket amplier
is being used for the front / rear / all speakers, the chime speaker can be adjusted for that particular application. This
setting will not aect the output of chimes through the factory amplier, only what chimes (front\rear) will
output through the external speaker and the volume of the chimes through the external speaker.
Front Chimes - On (Highlighted) / O (Not Highlighted)
Rear Chimes - On (Highlighted) / O (Not Highlighted)
Chime Speaker Volume - Slide Up to Increase
Slide Down to Decrease