Instruction Manual
Complete Radio Replacement with
Integrated Climate Control Retention for Select
2014–2020 Jeep Grand Cherokee
RPK4-CH4103
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 2
Rev: v.1
Date:041020
Part One: Disassembly of Factory Dash / Dash Prep.
Tools needed for installation: Phillips head screwdriver, pick
tool or small athead screwdriver, 7mm socket, ratchet, T20
torx screwdriver, plastic panel removal tool (example - PAC
part number TL-PRY2), and an airsaw or hacksaw for sub-dash
modication (only required for 2014–2018 applications).
1. Vehicle Accessories Button Inserts
2. Radio Dash Bezel with 5.2” LCD Display
3. External Chime Speaker
4. RP4.2-CH4103 Interface Harness
5. RP4.2-CH4103 Aftermarket Radio Connection
Harness (A109-RAD-HAR TYPE 1-V1)
6. Radio Mounting Shroud
7. AM / FM Antenna Adapter (BAADIN22)
Installation
Components
Start removing the dash panel by
gripping rmly and pulling straight
out from the bottom corner of
the panel. Once the bottom is
released, work your way around
the outside of the dash panel,
pulling away from the dash until
the dash panel comes free.
Step 1
8. Radio Mounting Brackets
9. Speaker Mounting Accessories
10. Reverse Camera Retention Harness (RPA-16P1V)
11. Single DIN Mounting Pocket
12. Radio Mounting Screws
13. RP4.2-CH4103 Radio Replacement Interface
14. LCD Display Harness
(10P-2-10P-18-HAR V2)
15. Female 3.5mm to Male RCA adapter
(X-3.5JACK3F-2RCAM)
16. Male 3.5mm to Female RCA adapter
(X-3.5JACK4M-3RCAF)
17. CAN-Bus Connection Harness (MQS4PT-36)
18. OEM USB Replacement Hub
1
4
6
14
15
16
10
17
8
5
2
11
3
13
7
18
After step 1, the disassembly and radio
removal process varies slightly depending on
whether the vehicle is between the years of
2014–2017 or if the vehicle is from 2018 and
up. If the vehicle is 2014–2017, proceed to
Page 3; otherwise, skip ahead to Page 5
Section B.
9
12