Instruction Manual

Complete Radio Replacement with

Integrated Climate Control Retention for Select

2014–2020 Jeep Grand Cherokee

RPK4-CH4103

PAC-audio.com

Pacific Accessory Corporation

Page 4

Rev: v.1

Date:041020

Part Two: Radio removal / Dash preparation (cont.)

With the harness clip released, it is possible to carefully pull just enough

length from the AC / Heater Control Module to allow the module to be

relocated to the right side of the dash opening.

Return the Keyless Entry Antenna

into place, and secure it with the two

7mm screws that were removed on

the previous page.

Step 9

Step 10

AC / Heater Control

Module

AC / Heater Control

Module

Cutting the Sub-Dash

To allow the Radio Mounting Shroud to

sit properly in the radio opening, the top

of the radio opening must be trimmed.

The cut must be made from the inner

corner of the two gussets / ribs, 9/16” in

height from the bottom lip.

9/16”

Corner of Gusset / Rib

Cut

Step 11

The sub-dash on 2018

and up vehicles is

designed di󰀨erently

and does not require

modication.

The clip that secures the harness

in place is pushed in place from

the back side of the opening. To

release the harness, the exposed

plastic nub must be pushed

forward through the opening.

Step 8