Instruction Manual

Complete Radio Replacement with

Integrated Climate Control Retention for Select

2014–2020 Jeep Grand Cherokee

RPK4-CH4103

PAC-audio.com

Pacific Accessory Corporation

Page 7

Rev: v.1

Date:041020

Part Three: Installing the New Dash Panel (cont.)

To install the vents in the new dash panel, slide the bottom of the vent under the

outermost bottom locking tab of the appropriate vent opening. Verify that the side tabs

are aligned, and then insert the vent positioning hooks into the vent positioning slots

at the top of the dash panel. Once the positioning hooks are in place, push the vent

towards the dash panel until the vent is fully seated and locked in place.

Installing the Vents from the Factory Dash Panel (cont.)

Slide Vent Under

Locking Tab

Side Tabs - Aligned

-Unlatched-

- Latched-

Insert Vent Positioning Hooks

Into Positioning Slots

Push Vent Fully Into Place

Top Tabs When Vent Is

Fully Inserted

From the front of the dash panel, inspect the vents to make sure there are no gaps

between the vents and the dash panel. Also, verify that the vent’s directional adjustment

for up and down, left and right is not binding against the dash panel.

Step 2

Step 1