User Manual

Installation of the Controller
17047 Ver 1.8 DRAFT C 4 Easikey® 1000
3. Installation of the Controller
3.1 Introduction
The following diagram shows the Easikey 1000 controller with dimensions, connections, etc.
Figure 1 Easikey 1000 Controller
The Easikey 1000 will need an enclosure and a power supply.
Two boxed versions of the Easikey 1000 are available:
• A “closed” box which must be opened to administer the system.
• An “open” box which has a cutout in the lid which allows access to the keypad without
opening the box. In this instance, only the Installation Engineer should have access to the
box.
Note
EASIKEY 1000 Plus indicates that the controller has door monitoring and alarm relay
facilities, see Section 5.