User Manual

15263 Ver 2.1 DRAFT E PAC Portico 2200/1200 Series Installation Guide
Page 34 © 2003 Blick USA, Inc.
5.1.1 Metal Enclosure
The door controller is contained in a metal enclosure. There are two metal enclosure options. The larger
option allows room for AEMs to be fitted. Both options have space for two 12V 7Ah lead acid batteries if
required. The metal enclosure dimensions for each option are shown in Figure 15 and Figure 16.
Note
Both options are UL approved.
The metal enclosure should be fitted to a wall using appropriate fixing screws. Use the central keyhole
slot to hang the enclosure initially and use the remaining fixing holes as a template. There are several
knockouts, shown in the following figures, provided for cable routing. Use conduit or trunking when
bringing surface mounted cables into the enclosure.
Note
The metal enclosure is usually locked with only service engineers allowed access.
Figure 15 Metal Enclosure Option 1