User Manual

PAC Portico 2200/1200 Series Installation Guide 15263 Ver 2.1 DRAFT E

5.2.7 Wiegand Readers

Wiegand readers with open collector D0, D1 can be connected to a PAC Portico 2200/1200 Series Door

Controller as shown in Figure 25. An interface kit is not required.

Note

+5V and +12V Wiegand readers require a reader level converter module, see 15300 Reader Level

Converter Module Installation Instructions.

Only one Wiegand reader can be used either as the in or out reader when directly connected to the door

controller channel and without the use of the proper interface.

If you are using Wiegand readers and require in/out readers, you must use a Wiegand interface unit for

each reader. Call PAC Portico Technical Support for details.

Figure 25 Wiegand Connections