User Manual

PAC Portico 2200/1200 Series Installation Guide 15263 Ver 2.1 DRAFT E

TRAN HI00 LO0000

This shows many events are currently in the High Priority (HI) queue

and how many in the Low Priority (LO) queue . If the door controller is

communicating to the administration system, both these values should

be 0.

Press the NXT.

CTS OVRD TAMP @

OVRD if OVRD displays, the terminals F+ and F- are closed,

emergency override active.

TAMP if TAMP displays, the terminals T+ and T- are closed, enclosure

tamper active.

CTS if CTS displays, the serial port CTS signal is high.

@ this character represents the last command received from the

PC or CNC. It may be ? or / at times.

Press the ESC.