User Manual

PAC Portico 2200/1200 Series Installation Guide 15263 Ver 2.1 DRAFT E
© 2003 Blick USA, Inc. Page 71
Number Description Priority Dial-Back? Forget?
25
Editor Off
An operator has exited the editor of a PC
administration system or it has timed out.
26
Editor On
An operator has entered the editor of a PC
administration system.
27
Alarm Zone Active
An Alarm Module or AEM input has activated.
high yes
28
Zone Restored & Rearmed
An alarm module input has been restored. If
reactivated it will cause another alarm.
high
29
Auto Zone Disable
An alarm module input has been disabled with a time
profile.
time
event
30
Auto Zone Enable
An alarm module input has been enabled with a time
profile.
time
event
31
Local Alarm Accepted
An alarm has been accepted at the door controller by
presenting an Editor key.
high
32
No Access: Visit Time
A visitor key has been presented, but its visit time
has expired.
high negative
33
No Access: Unknown ID
A key has been presented, but it is unknown to the
door controller.
negative
34
Manual Zone Disable
An alarm module input has been disabled by an
operator.
35
Manual Zone Enable
An alarm module input has been enabled by an
operator.
36
Alarm Acknowledged
An Unauthorized Access, Anti Tamper or Zone Alarm
has been accepted by an operator.
37
Override Alarm Accepted
An Override Alarm has been accepted by an
operator.
38
RTE Button Held Down
A Request to Exit button has been continuously
tripped 5 cycles and the door has closed.
high
39
Repeated Key Use
The same key has been presented continuously to a
reader for 5 lock cycles and the door has closed.
high
40
PIN Reader Duress
A PIN duress code has been entered (PIN +1) and
the door has opened.
high yes
41
Duress Alarm Accepted
A PIN Duress Alarm has been accepted by an
operator at the PC administration system.