Installation Guide
2
Pacic Accessory Corporation
Santa Ana, CA 92705
techsupport@pac-audio.com • www.pac-audio.com
Copyright 2013 Pacic Accessory Corporation. Content subject to change without notice.
3.5mm Audio to 3.5mm Audio
Commonly used when using a Smartphone as a 3.5mm audio input and noise enters phone through the phone
charger. When utilizing the L.O.C.PRO
™
LPGL-2 for 3.5mm input/output disconnect the original 3.5mm cable and
connect it to the input of LPGL-2. Then connect the included 3.5mm output cable to the original input point and the
output from the LPGL-2. Most applications will not require connection of the ground wires. If noise is still present,
on a clean grounding point try temporally connecting one ground at a time, alternating between the two and nally
connecting both. Test the system and permanently make the connections with the best sounding scenario.
Mount the LPGL-2 using wire ties, screws or double tape.
Audio Ground Input -
Audio Ground Input -
3.5mm Input / Output
(
OPTIONAL
)
(
OPTIONAL
)
Input
Output
3.5mm Audio to RCA Audio
When utilizing the L.O.C.PRO
™
LPGL-2 for 3.5mm input to RCA output disconnect the original 3.5mm cable and
connect it to the input of LPGL-2. Then connect the included 3.5mm to RCA adapter to the LPGL-2 output and the
RCA cable input. Most applications will not require connection of the ground wires. If noise is still present, on a clean
grounding point try temporally connecting one ground at a time, alternating between the two and nally connecting
both. Test the system and permanently make the connections with the best sounding scenario.
Mount the LPGL-2 using wire ties, screws or double tape.
Audio Ground Input -
Audio Ground Input -
(
OPTIONAL
)
(
OPTIONAL
)
Input
Output
Choose for your
application.
Note: Only One 3.5mm cable is included with interface