Owner's Manual
[{ij[J)[J}[}fl
W
fB[{JOc
fl
Rt:A
NlliSB
filter
PAC
Pacific
Accessory
Corporation
The
SNI-1
eliminates ground loops from the source Pre-amp
outputs
and
reduces engine noise and
DC
current
through
the
RCA
cables. The
SNI-1
uses
an audio transformer for
ground
loop isolation, providing a 1.3dB gain and
O.SdB
linearity from 20-20,000Hz.
The
SNI-1
is
directional. The inputs are Male
RCA
plugs, and
the
outputs
are
Female
RCA
jacks. Insure
that
the
source
unit
(Stereo,
EQ,
Etc.)
is
connected
to
the
inputs
of
the
SNI-1.
Connect the brown wires
to
ground
only
if
there
is
no
sound
out
of
the
amplifier, connect them
both
to
the
source chassis
case.
For Technical Assistance call: 866-931-8021
E-mail
us
at: Techsupport@pac-audio.com
For updates and bulletins visit
our
website at: www.pac-audio.com
Pacific Accessory Corporation
is
committed
to
ongoing
research and develop-
ment. New materials and design refinements may be introduced in order
to
improve performance, function and reliability.
For
this reason, Pacific Accessory
Corporation reserves
the
right
to
make changes
without
notice
to
and
product
or
specification described herein.
Designed and Engineered in
the
U.S.A.
Made
in China
Pacific Accessory Corporation
1340 Ritchey St.
Santa Ana,
CA
92705
techsupport@pac-audio. com
www.pac-audio.com • Ph: 866-931-8021
© 2009 Pacific Accessory Corporation