Owner manual

ManualsBrandsPace-Edwards ManualsCarBedlocker Electric Standard

Tools Required for Assembly......................... 2

Before You Start ...........................................2

Drain Hole Locations .................................... 2

STEP 1: Remove Contents from Box .......... 2

Packaging Contents ...................................... 3

STEP 2: Install Wiring Harness .................... 3

STEP 3: Place Canister................................ 3

STEP 4: Install Rails..................................... 4

STEP 5: Installing Clamps & Shims ..........4-5

STEP 6: Lubricating the sweep seals........... 5

STEP 7: Connecting the Electronics ............ 5

STEP 8: Installing Drain Tubes..................... 6

STEP 9: Install Top Cover ............................ 6

Release Handle Instructions ......................... 7

Helpful Maintenance Hints ........................... 7

Warranty Statement....................................... 8

Part #: BL-INSTALL 0611

STANDARD INSTALLATION INSTRUCTIONS

(800) 338-3697

www.paceedwards.com

Pace Edwards Company

2400 Commercial Blvd.

Centralia WA 98531

ELECTRIC RETRACTABLE TRUCK BED COVER

TABLE OF CONTENTS

Summary of content (8 pages)

PAGE 1
ELECTRIC RETRACTABLE TRUCK BED COVER STANDARD INSTALLATION INSTRUCTIONS TABLE OF CONTENTS (800) 338-3697 www.paceedwards.com Pace Edwards Company 2400 Commercial Blvd. Centralia WA 98531 Tools Required for Assembly ......................... 2 Before You Start ........................................... 2 Drain Hole Locations .................................... 2 STEP 1: Remove Contents from Box .......... 2 Packaging Contents ...................................... 3 STEP 2: Install Wiring Harness .....
PAGE 2
TOOLS REQUIRED FOR ASSEMBLY: 7/16” wrench or socket #2 Phillips screwdriver 3/8” wrench or socket Tape measure Note: There should be no drilling into the truck body needed on most standard or full-size trucks . BEFORE YOU START: Read the instructions carefully before you start. These instructions are written for one-person installation. We have noted where briefly having an extra person’s assistance can make installation easier.
PAGE 3
PACKAGING CONTENTS: Rails (left & right) Complete Canister Assembly Rails Come in a separate Box. CAUTION! Top Cover Drain Tubes Clamp Pack Hardware Pack DO NOT USE A KNIFE TO OPEN THE RAIL BOX. OPEN THE RAIL BOX ALONG THE LENGTH OF THE BOX AND LIFT RAILS OUT TO AVOID SCRATCHING THE SURFACE OF THE RAILS ON THE PACKAGE STAPLES.
PAGE 4
STEP 4: INSTALLING RAILS REMOVE PROTECTIVE PAPER UNDERSIDE OF RAILS. THIS IS PACKAGING PURPOSES ONLY. ON FOR The machined end of the rail attaches to the canister. You will need to lift the hanging portion of the ribbed blanket and thread it in the rail while sliding the rail into the rail grip mounted to the ends of the canister (the underside of the blanket ribs need to nest on the gear). Rail Grips Make sure both flanges of rail slide into the rail grip. Push the rails forward against the canister.
PAGE 5
STEP 5: INSTALLING CLAMPS & SHIMS (CONTINUED) Outside of Truck Bed Rail Clamp Shim Bracket Adjusting Bolt Clamp Bolt (tighten for proper fit) FIG. 5C FIG. 5B FIG. 5A Rail Inner Bed Wall Clamp Rail Grip Plastic Shims Inside of Truck Bed Alternate Style Clamp for certain truck applications Rail Clamp Rail Grip Self-tapping screw TR1010 flush mount clamp Clamp Bolt (tighten for proper fit) Inside of Truck Bed FIG.
PAGE 6
STEP 8: INSTALLING DRAIN TUBES First ensure that the washer is in place on the drain tube end being inserted into the canister (This will prevent water leakage). With the cover opened, insert the drain tube fittings into the pre-drilled holes on the underside of the canister by pushing them in place from under the canister. Drain tube should click into place. Place the other end of the drain tube through the grommet or through the pre-drilled holes in the floor or the front wall of the truck bed.
PAGE 7
RELEASE HANDLE INSTRUCTIONS please do not hesitate to call us at: (800) 338-3697 and ask for our technical service department. You have now completed the installation of the Bedlocker Electric hard tonneau cover. If you have any questions If power is lost to the Bedlocker unit or the electric drive system fails to operate and you have to use the cover right away you can do the following to open or close the cover: RELEASE HANDLE 1.
PAGE 8
C O N G R AT U L AT I O N S ! On your purchase of a Pace Edwards Retractable Truck Bed Cover. We are confident that you will get many years of trouble free service from this accessory to your truck. Please take a moment to fill out the warranty registration form to activate warranty coverage of your truck bed cover. PACE EDWARDS PRODUCT WARRANTY PACE EDWARDS (hereinafter referred to as the MFG.