Operation Manual

17
OPERATING YOUR SET-TOP (cont.)
Using the front-panel buttons
You can use the buttons on the front panel to operate your set-top, if, for example, there is a problem with your remote control.
guide
To display an on-screen guide
bypass
To turn the RF bypass feature on/off
menu
To display on-screen menus
info
To display on-screen information
channel U and D
To change channel
up or down
power button
To turn your set-top on/off
power light (next to button)
Lights blue when your set-top is
on; red when your set-top is off;
not lighted when your set-top is
disconnected from the power supply
Lights when your set-top is receiving a signal
from the remote control
Lights when your set-top outputs High
Definition Television (HDTV) content
Lights when your set-top receives
multi-channel sound
Lights when there is an unread message
Lights while the bypass feature is on
Lights if the current program has a
special broadcast security flag
smart-card slot
For future use
front-panel display
Appears when your set-top
is turned on
Shows the program channel
number or the time
Also displays HDTV settings
(see page 21)
play/record lights
Indicate the play or record
state of each display channel
Lights green to signify
playback; lights red to signify
record
L, R, U and D
To move left/right/
up/down in an on-
screen menu/guide
select button
To select items in
menus/guides
VIDEO IN;
AUDIO IN L and R
(behind push panel)
Baseband inputs – for
future use
USB connector
– for future use