Spec Sheet

BULLETIN

PP-631D

FEB. 2015

SERIES ‘I’ SELF-PRIMING

CENTRIFUGAL PUMPS

HORIZONTAL ... LONG or CLOSE COUPLED

CHEMICALS / WASTES / ACIDS

INDUSTRIAL LIQUIDS / OILFIELD

AQUACULTURE / AGRICULTURE

• Corrosion resistant materials

Stainless steel casing, ﬁ berglass reinforced polyester,

polypropylene or Ryton® internals with choice of elasto

mers. See chemical resistance chart for compatibility.

• Suction lift to 20 feet (6m) vertical*

• Flows to 170 GPM or 75 feet TDH

(To 650 LPM or 23m TDH)

• Dual ports 1-1

1/2

” female and 2” male NPT or BSP

• Built-in check valve and double ﬂ ush volute

• Close coupled, long coupled or pedestal mounted

• Gasoline engine, TEFC electric, hydraulic or pneu

matic motors

• Wetted metallic components are 316 stainless steel

SERIES ‘I’ self-priming pumps are constructed with 316 stainless steel

housing, ﬁ berglass reinforced polyester, polypropylene or Ryton® inter-

nals, EPDM, Buna-N or Viton® elastomers, 304SS external hardware

and quick release clamp. All pumps include a built-in check valve and

a double ﬂ ush volute. Series ‘I’ pumps are close coupled to gasoline

engines; or electric, hydraulic and pneumatic motors to ﬁ t most power

requirements. They may also be pedestal mounted for long coupling to

electric or gasoline drivers; or for ﬂ exible coupling to the users driver.

This lightweight, self priming pump provides corrosion resistance and

efﬁ cient performance for a wide variety of water and corrosive liquid ap-

plications.

* Based on water-like liquids at 70 degrees F and at 3450 RPM after initial priming of

pump housing.

* Consult factory for model numbers containing Ryton® components.

PAGE 1
SERIES ‘I’ SELF-PRIMING CENTRIFUGAL PUMPS BULLETIN PP-631D FEB. 2015 HORIZONTAL ... LONG or CLOSE COUPLED CHEMICALS / WASTES / ACIDS INDUSTRIAL LIQUIDS / OILFIELD AQUACULTURE / AGRICULTURE • Corrosion resistant materials Stainless steel casing, ﬁberglass reinforced polyester, polypropylene or Ryton® internals with choice of elasto mers. See chemical resistance chart for compatibility.
PAGE 2
BULLETIN PP-631D FEB. 2015 page 2 SERIES ‘I’ SELF-PRIMING PUMP speciﬁcations PEDESTAL MOUNTED CLOSE COUPLED ELECTRIC Pump with electric, hydraulic or pneumatic drive close-coupled or pedestal mounted for ﬂexible coupling Pump constructed with stainless steel housing.