INSTALLATION GUIDE Bainbridge Pull Out Kitchen Faucet PB-K03
RECOMMENDED TOOLS AND MATERIALS ¨ ¨ ¨ ¨ ¨ ¨ ¨ Plumbers Putty Adjustable Wrench Tape Measure Basin Wrench Phillips Screwdriver Pencil Masking Tape BEFORE YOU BEGIN There are a variety of things to do before installing any new plumbing system into your home or residence.
INSTALLATION OF THE FAUCET Before starting turn off both the hot and cold water supply lines and remove the old faucet. Clean around all areas of attachment before placing new faucet on sink to help prevent corrosion after installation. Parts List Screw Weight Screw 1 Lock-nut Washer Base-plate Deck-plate Weight Fastening Deck-Plate (Optional) Apply plumbers putty or other suitable sealant to the bottom edges of the base-plate.
2 Secure Faucet Remove both the lock-nut and washer provided. Place faucet on sink by feeding hoses down through the center hole in sink. From below secure faucet by re-attaching lock-nut and washer and screwing down until tight. Make sure you tighten lock nut before screws. 3 Connect Hose Attach the weight to the hose at a length suitable to you (The further from the end you place the weight the longer your reach will be when pulling the hose out for use).
4 Connect Supplies Securely attach marked supply lines with corresponding hot and cold tubes from faucet. Tighten all connections with wrench to ensure that no leaking occurs. With all pipe attachments plumbers tape can be utilized to help reduce the risk of leaking. 5 Flush Lines Pull the sprayer out to partially expose the hose. Position the hose in the sink. Tie or tape the hose to the sink to prevent it from sliding back into the faucet. Remove the aerator.
Limited Lifetime Warranty Pacific Bay products have been manufactured under the highest standards of quality and workmanship. Pacific Bay warrants to the original purchaser for as long as the original purchaser owns their home that this faucet will be leak- and drip-free during normal use and that all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship.
______________________________________________________________________________
______________________________________________________________________________