Instructions / Assembly

2 Install Water Control Lever
Determine the direction you would like the handle to face when in the off (down) position.
Generally, when installed in the center of the sink, this would be straight forward and when
installed in the corner of the sink, diagonally across the sink. Center the faucet through the hole
in your sink and then hold faucet body in place. Tighten mounting nut until faucet is secure being
careful not to over tighten and then screw in lock-nut screws for final tightening.
3 Connect Hose
Connect sprayer hose. Attach the weight to the hose at a length suitable to you (The further from
the end you place the weight the longer your reach will be when pulling the hose out for use).
You may move the weight to adjust the pull-out length of the hose. Carefully tighten the weight.
!
!
!
!
!
!
!
!