Instructions / Assembly

4 Connect Supplies
Connect hot water supply to longer of the two flexible supply hoses and cold water supply to
shorter of these hoses. Flexible supply hoses are complete with 3/8” compression fittings for
your convenience. With all pipe attachments plumbers tape can be utilized to help reduce the risk
of leaking.
5 Flush Lines
Pull the sprayer out to partially expose the hose. Position the hose in the sink. Tie or tape the
hose to the sink to prevent it from sliding back into the faucet. Remove the aerator.
Turn on the hot and cold water supply lines. Turn the faucet handle to the cold side and lift the
handle to the “on” position. Run the water for one minute to remove any potential debris. Rotate
handle to the warm side and run for a minute. During this process watch for any water leaks in
the pipe. Reinstall the aerator.