INSTALLATION GUIDE Lakewood Waterfall Single Lever Bathroom Faucet PB-L02
RECOMMENDED TOOLS AND MATERIALS ¨ ¨ ¨ ¨ ¨ ¨ ¨ Plumbers Putty Adjustable Wrench Tape Measure Basin Wrench Phillips Screwdriver Pencil Masking Tape BEFORE YOU BEGIN There are a variety of things to do before installing any new plumbing system into your home or residence.
1 Secure Faucet Remove both the lock-nut and washer provided. Place faucet on sink by feeding hoses down through the center hole in sink. From below secure faucet by re-attaching lock-nut and washer and screwing down until tight. Make sure you tighten lock nut before screws. 2 Connect Supplies & Flush Lines Securely attach marked supply lines with corresponding hot and cold tubes from faucet. Tighten all connections with wrench to ensure that no leaking occurs.
Limited Lifetime Warranty Pacific Bay products have been manufactured under the highest standards of quality and workmanship. Pacific Bay warrants to the original purchaser for as long as the original purchaser owns their home that this faucet will be leak- and drip-free during normal use and that all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship.