Owner's Manual

Hardware Bag:
To be performed by a supervising adult
Before every ride, it is important to carry out the following
safety checks. Do not ride a baery-powered ride-on toy that is
not in proper working condion! Replace any worn or broken
parts as needed.
Steering and Control
The steering wheel or handlebars are ghtened and
secured in the mount or dashboard.
The steering wheel or handlebars are posioned so that
the rider can easily operate and steer the ride-on.
There must be no diculty for the rider in turning and/or
operang the powered foot pedal or hand operated push
buon.
The steering wheel or handlebars are aligned so that the
steering column and front wheels are oriented in the
same direcon.
Wheels
The wheels are securely aached to the baery-powered
ride-on and they are in good condion. It is acceptable to
have slight lateral movement in each wheel.
The wheels have no holes or are worn down in any one
area and that the tracon strips are intact and secured to
the wheels.
The drive wheel is securely fastened to the gear box, which
houses the motor.
Ride-on
For all electrical components, make sure:
• The baery is fully charged.
• The charging cord is NOT aached to the ride-on in
any way.
• All connectors are securely snapped in place and
will not come detached while riding.
• No wiring is exposed, worn, or detached in any
way; the motor is not hot to touch.
• All electrical buons, including the power buon,
accelerator foot pedal or hand operated buon,
and any buons for lights and sounds, work
properly.
• If the ride-on’s electrical components show any sign
of damage or missing parts DO NOT RIDE unl the
condion is corrected.
Make sure the ride-on is:
• Clean, dry, and in good condion.
• All plasc pieces, including fenders, seat, footrests,
steering wheel or handlebars, wheels, bumpers,
and/or hub caps are securely aached.
• There are no cracks or structural problems on the
ride-on toy.
• If the ride-on toy shows any sign of damage or
missing parts DO NOT RIDE IT unl the condion
is corrected.
4 5
x2
x3
Parts
Parts Checklist
Pre-Ride Safety Checklist
Before you begin assembling, check that all parts listed are present..
Number Part name Quanty
1 Windshield 1
2 Seat screw 2
3 Seat 1
4 Steering wheel 1
5 Steering wheel bolt (aached to steering wheel) 1
6 Steering wheel nut (aached to steering wheel) 1
7 Audi Q5 body 1
8 Small wheel washer 3
9
Non-drive wheel
3
10
Large wheel washer
4
11 Wheel nut (aached to axles) 4
12 Wrench (aached over the nut on axles) 4
13 Hubcap 4
14 Remote control 1
15
Baery charger
1
16
Gear wheel
1
x4
Tools Required
1
3
8
7
9
1
11
10
12
13
2
4
5
6
14
15
16